|
|
1. Unfold floor (F) and smooth part out flat to make a circle.
|
|
2. Unfold wall unit (D) and place upright inside floor. Shape wall unit to circle.
|
|
3. Attach steam hose tube (B) to white plastic tee (G). Keep tee in horizontal position when using the sauna, this will avoid direct steam contact to your body.
|
|
4. Snap 12 base ring pieces (C) together to form a circle.
|
|
5. Place completed base ring circle, smooth side up, inside of wall unit and push down to the floor.
|
|
6. Pull floor up all around wall unit.
|
|
7. Slide drawstring balls inward towards wall unit until snug.
|
|
8. Unzip half-moon zipper. Locate two (2) short wire battens (E) and vinyl slot guides on upper right side of wall unit.
|
|
9. Insert short, wire batten through two vinyl slot guides on upper left side of wall unit and one (1) short wire batten through two (2) vinyl slot guides on upper right side of wall unit.
|
|
10. Insert long wire batten through center vinyl slot guide of upper lip of wall unit and connect to two (2) shorter battens installed in step 8.
|
|
11. Align wire batten along seam where wall unit and top flap of sauna join.
|
|
12. Attach steam hose tube to steam pot (A).
|
